How to Maintain Your Own Swimming Pool
If you own a swimming pool, then you have to make sure that it is always clean, and this task is not as difficult as your think. When talking about a pool’s preservation needs, it will depend on the kind of pool you have. If you want to have a swimming pool that is healthy and clean, then it is very important that you do regular care to it. If you want to prevent certain issues or having damaged equipment, then you should seek guidance from a pool maintenance guide before doing anything else. If your pool is regularly maintained, then you will prevent things that will cause you annoyance and reduce visits to the store for supplies. Hiring a professional to clean your swimming pool is a great idea, but you don’t just give all the responsibility to them because you still need to do a few things to ensure that your pool remains in good condition for a long time.
Here are some guides for pool maintenance.
The chemistry of your pool needs to be observed at least 2 time a week through the summer and once during winter. If your pool is winterized during the winter, then there is no need to test the water. It is still possible for algae and bacteria to grow even if it is very cold outside. Shock your pool every 6 weeks or so even during the winter months.
Make sure you check the water level once every month and adjust as required. Water level should be at the middle of the skimmer. If your water level is too high, it can create poor water circulation and movement and this makes it more challenging.
There should be regular scrubbing of walls and tiles. Algae issues will be eliminated by scrubbing the walls. You can have money savings if your tiles are always clean. Walls and steps are the places where algae likes to adhere to. Be sure to keep your walls and steps clean.
If there are broken or misplaced drains and suction supplies, replace them. This is an important part of swimming pool maintenance. If there is a suction side leak at the pump, you are sucking air into the system. Check the return lines when you run your equipment and look at the water coming out and this will help you gauge leaks. You will know that excessive air is getting into the system if your find a lot of bubbles. If too much air gets into the system, your pump can run dry and cause it to freeze. This is an expensive replacement that you will need to do.
The pH level should not go above 8.0. Keep the pH in check so that you can use the maximum potential of the chlorine contained in the pool. IF the pH of the water goes below 7.2, then the chlorin will reduce its effectiveness. Even if you add more chlorin, you will not benefit from it in the same way. This is just like throwing away your money.